Answered

Bluefield Corp. has two product lines, A and B. Bluefield has identified the following information about its overhead and potential cost drivers: Total overhead$69,300 Cost drivers Number of labor hours1,900 Number of machine hours45,000 Required: 1. Suppose Bluefield Corp. uses a traditional costing system with number of labor hours as the cost driver. Determine the amount of overhead assigned to each product line if Product A requires 76 percent of the labor hours and Product B requires 24 percent. 2. Suppose Bluefield uses a traditional costing system with machine hours as the cost driver. Determine the amount of overhead assigned to each product line if Product A consumes 17,700 machine hours and Product B consumes 27,300.

Answer :

Kolawole845

Answer:

Overhead assigned to product  labour hours

Product A =  $36.5  per hour ×  76%×  1900= 52,706.0  

Product B =  $36.5  per hour ×  24%×  1900= 16,644.0

Overhead assigned to product using machine hours

Product A =  $1.54 × 17,700= $27,258

Product B =  $1.54   × 27,300 =$42,042

Explanation:

Under the traditional absorption costing system, overhead is assigned to units produced using the direct labour hours or machine hours basis.

Overhead absorption rate = Budgeted overhead for the period/Budgeted labour hours

OAR = $69,300 /1,900 hours  

= $36.5  per hour

Overhead assigned to product

Product A =  $36.5  per hour ×  76%×  1900= 52,706.0  

Product B =  $36.5  per hour ×  24%×  1900= 16,644.0

Overhead absorption rate = Budgeted overhead for the period/Budgeted machine hours

OAR = $69,300 /45,000 hours= $1.54 per hour

Overhead assigned to product

Product A =  $1.54 × 17,700= $27,258

Product B =  $1.54   × 27,300 =$42,042

Other Questions