samartensHothystam samartensHothystam

Today at 6:24 AM
History

Answered

What surrounds most of the northern section of eastern orthodox land?

Answer :

MissPhiladelphia MissPhiladelphia

Today at 6:29 AM

For the answer to the question What surrounds most of the northern section of eastern orthodox land? It is the Baltic Sea borders Eastern Orthodox land, including Russia, to the north.

I hope my answer helped you. Have a nice day!

Answer Link

Other Questions

What was Fundamentalism and how did this group of people respond to the trends of the 1920s?

A stately dance in duple meter similar to the pavane is the: a. galliard b. allemande c. courante d. sarabande

A stately dance in duple meter similar to the pavane is the: a. galliard b. allemande c. courante d. sarabande

Maximum allowable cutting speed for mild steel is 300m/min. With a depth of cut of 3mm, and a feed rate of 0.15mm/rev, what is the maximum material removal rate

On what day during Lent does the Bishop bless holy oils for the year? a. Ash Wednesday b. Holy Thursday c. Good Friday d. Palm Sunday

The value of 16x^2 -24xy+9y^2, where x=1/4 and y =1/3 is

the price of chair is Rs.275.how much will 165 such chairs cost.

Questions no 1 solve fast

Define attitude. Discuss the components of an attitude.

Volume of a cuboid of l=5.5 c.m, b=4.5c.m and h=2 c.m

On what days are Catholics required to fast during Lent? a. Ash Wednesday and Good Friday b. Every Friday c. Palm Sunday and Easter Sunday d. Ash Wednesday and

What food was traditionally eaten the day before Lent begins? a. Fish b. Pancakes c. Eggs d. Chicken

A milling machine with a spindle speed of 100rpm has to cut a straight slot of 10 mm width and 2 mm depth by a cutter of 10 mm diameter between points (0,0) and

What Irish saint's feast day takes place during Lent? a. St. Patrick b. St. Brigid c. St. Columba d. St. Kevin

Assume you are production in-charge to establish a manufacturing process for making a part with a tolerance range of 0.1mm. What will be the maximum standard de

A sine bar is used to measurE.A. Internal TapersB. External TapersC. Surface roughnessD. Thread pitch

For a grinding wheel, 51-A-36-L-5-V-23, what does the "36" mean?A. high grade scaleB. dense structureC. medium grain scaleD. a bond type

A hole is being drilled with 5 mm drill at a feed of 0.1 mm/revolution and rpm is 200. Calculate the metal removal rate in mm^3 /minute..A. 392.5B. 785C. 1570D.

Calculate the power required in KW, for machining of a workpiece on lathe having efficiency of 85% on full load, when tangential force required is 1000N and cut

Degree of polymerization is defined by which one of the following?A. average number of mers in the molecule chainB. proportion of the monomer that has not been